 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ARIZONA MICROTEK, INC. AZ10EL58 AZ100EL58 ECL/PECL 2:1 Multiplexer FEATURES * * * * 230ps Propagation Delay High Bandwidth Output Transitions 75k Internal Input Pulldown Resistors Direct Replacement for ON Semiconductor MC10EL58 & MC100EL58 PACKAGE SOIC 8 SOIC 8 TSSOP 8 TSSOP 8 1 2 PACKAGE AVAILABILITY PART NUMBER AZ10EL58D AZ100EL58D AZ10EL58T AZ100EL58T MARKING AZM10EL58 AZM100EL58 AZTEL58 AZHEL58 NOTES 1,2 1,2 1,2 1,2 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date Code "YWW" on underside of part. DESCRIPTION The AZ10/100EL58 is a 2:1 multiplexer. The device is functionally equivalent to the E158 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E158, the EL58 is ideally suited for those applications that require the ultimate in AC performance. NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM AND PINOUT ASSIGNMENT FUNCTION TABLE SEL* H L Q Da Db NC 1 8 VCC * Pin will default low when left open. PIN DESCRIPTION PIN Da, Db Q, Q SEL VCC VEE NC FUNCTION Data Inputs Data Outputs Select Positive Supply Negative Supply No Connect Da 2 MUX 7 Q Db 3 6 Q SEL 4 5 VEE 1630 S. STAPLEY DR., SUITE 127 * MESA, ARIZONA 85204 * USA * (480) 962-5881 * FAX (480) 890-2541 www.azmicrotek.com AZ10EL58 AZ100EL58 Absolute Maximum Ratings are those valuse beyond which device life may be impaired. Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +8.0 0 to +6.0 -8.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA C C 10K ECL DC Characteristics (VEE = -4.75V to -5.5V, VCC = GND) Symbol Characteristic 1 VOH Output HIGH Voltage VOL Output LOW Voltage1 VIH Input HIGH Voltage VIL Input LOW Voltage Input HIGH Current IIH Input LOW Current 0.5 IIL IEE Power Supply Current 14 17 1. Each output is terminated through a 50 resistor to VCC - 2V. Min -1080 -1950 -1230 -1950 -40C Typ Max -890 -1650 -890 -1500 150 Min -1020 -1950 -1170 -1950 0.5 0C Typ Max -840 -1630 -840 -1480 150 17 Min -980 -1950 -1130 -1950 0.5 25C Typ Max -810 -1630 -810 -1480 150 17 Min -910 -1950 -1060 -1950 0.5 85C Typ Max -720 -1595 -720 -1445 150 17 Unit mV mV mV mV A A mA 14 14 14 10K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol Characteristic 1,2 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 VIH Input HIGH Voltage1 VIL Input LOW Voltage1 IIH Input HIGH Current Input LOW Current 0.5 0.5 0.5 IIL IEE Power Supply Current 14 17 14 17 1. For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. 2. Each output is terminated through a 50 resistor to VCC - 2V. Min 3920 3050 3770 3050 -40C Typ Max 4110 3350 4110 3500 150 Min 3980 3050 3830 3050 0C Typ Max 4160 3370 4160 3520 150 Min 4020 3050 3870 3050 25C Typ Max 4190 3370 4190 3520 150 17 Min 4090 3050 3940 3050 0.5 85C Typ Max 4280 3405 4280 3555 150 17 Unit mV mV mV mV A A mA 14 14 100K ECL DC Characteristics (VEE = -4.2V to -5.5V, VCC = GND) Symbol Characteristic 1 VOH Output HIGH Voltage VOL Output LOW Voltage1 VIH Input HIGH Voltage VIL Input LOW Voltage Input HIGH Current IIH Input LOW Current 0.5 IIL IEE Power Supply Current 14 17 1. Each output is terminated through a 50 resistor to VCC - 2V. Min -1085 -1830 -1165 -1810 -40C Typ -1005 -1695 Max -880 -1555 -880 -1475 150 Min -1025 -1810 -1165 -1810 0.5 0C Typ -955 -1705 Max -880 -1620 -880 -1475 150 17 Min -1025 -1810 -1165 -1810 0.5 25C Typ -955 -1705 Max -880 -1620 -880 -1475 150 17 Min -1025 -1810 -1165 -1810 0.5 85C Typ -955 -1705 Max -880 -1620 -880 -1475 150 19 Unit mV mV mV mV A A mA 14 14 16 100K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol Characteristic 1,2 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 VIH Input HIGH Voltage1 VIL Input LOW Voltage1 IIH Input HIGH Current Input LOW Current 0.5 0.5 0.5 IIL IEE Power Supply Current 14 17 14 17 1. For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. 2. Each output is terminated through a 50 resistor to VCC - 2V. Min 3915 3170 3835 3190 -40C Typ 3995 3305 Max 4120 3445 4120 3525 150 Min 3975 3190 3835 3190 0C Typ 4045 3295 Max 4120 3380 4120 3525 150 Min 3975 3190 3835 3190 25C Typ 4045 3295 Max 4120 3380 4120 3525 150 17 Min 3975 3190 3835 3190 0.5 85C Typ 4045 3295 Max 4120 3380 4120 3525 150 19 Unit mV mV mV mV A A mA 14 16 November 2006 * REV - 3 www.azmicrotek.com 2 AZ10EL58 AZ100EL58 AC Characteristics (VEE =10E(-4.75V to -5.5V), 100E(-4.2V to -5.5V); VCC=GND or VEE =GND, VCC =10E(+4.75V to +5.5V), 100E(+4.2V to +5.5V)) Symbol tPLH / tPHL tr / t f Characteristic Propagation Delay to Output D to Q SEL to Q Rise/Fall Time 20 - 80% Min 60 90 100 -40C Typ 220 250 Max 380 410 350 Min 110 140 100 0C Typ 220 250 Max 330 360 350 Min 120 150 100 25C Typ 230 260 Max 340 370 350 Min 140 170 100 85C Typ 250 280 Max 360 390 350 Unit ps ps November 2006 * REV - 3 www.azmicrotek.com 3 AZ10EL58 AZ100EL58 PACKAGE DIAGRAM SOIC 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z MILLIMETERS MIN MAX 1.75 0.10 0.25 1.25 1.45 0.25 0.36 0.49 0.19 0.25 4.8 5.0 3.8 4.0 1.27 5.80 6.20 1.05 0.40 1.00 0.60 0.70 0.25 0.25 0.10 0.30 0.70 8O 0O INCHES MIN MAX 0.069 0.004 0.010 0.049 0.057 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.039 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O November 2006 * REV - 3 www.azmicrotek.com 4 AZ10EL58 AZ100EL58 PACKAGE DIAGRAM TSSOP 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z MILLIMETERS MIN MAX 1.10 0.05 0.15 0.80 0.95 0.25 0.25 0.45 0.15 0.28 2.90 3.10 2.90 3.10 0.65 4.70 5.10 0.94 0.40 0.70 0.10 0.10 0.10 0.35 0.70 6O 0O November 2006 * REV - 3 www.azmicrotek.com 5 AZ10EL58 AZ100EL58 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. November 2006 * REV - 3 www.azmicrotek.com 6 |
Price & Availability of AZ100EL58D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |